类X-37B升力体再入飞行通信特性中断研究

针对再入非平衡等离子流场的数值仿真方法及等离子体鞘套对不同波段电磁波传输特性的预测开展研究。首先，利用某工程钝头体飞行器再入实测通信飞行测量数据，初步校验数值仿真等离子体特性和通信特性方法的正确性；其次，在典型弹道下针对升力体再入飞行器开展等离子体鞘套数值仿真，分别给出S波段、Ka波段与K波段电磁波衰减特性，研究指出结合当前国内中继星体制情况采用高频段电磁波Ka波段或K波段中继通信方式是解决通信黑障的技术途径之一；最后，研究了电磁波数衰减受传播方向角和攻角的影响规律。研究结果可为发展解决我国再入飞行器通信黑障的设计方案提供参考。     

高精度盘式永磁电机温度分析与研究

以高精度无槽盘式永磁电机为研究对象,建立了电机三维电磁仿真模型。详细分析了该电机反电动势和转矩特性,避免由高次谐波引起的定、转子及永磁体涡流损耗,有效改善了电机的热性能,为进一步研究打下基础。建立了三维温度场仿真模型,分析了热源分布和传热过程,计算了电机在自然散热条件下温度的稳态分布。最后通过电机温升试验,验证了理论分析的正确性与合理性。     

基于波长控制的光纤陀螺标度因数温度性能提高方法

光纤陀螺的标度因数与光纤环的长度、直径及光源的平均波长有关。在温度条件下，光纤环的长度、直径及光源的平均波长均会发生变化，进而导致光纤陀螺在高低温下的标度因数不同，影响温度环境下的光纤陀螺标度因数的重复性。提出了一种基于光纤陀螺波长控制的标度因数温度性能提高方法，该方法在光源驱动电路的桥式回路中增加了铂电阻组件，从而可自动调节光纤陀螺光源的管芯温度，进而控制光源平均波长的变化，以抵消光纤环有效面积因温度变化而对标度因数产生的影响，提高温度环境下光纤陀螺的标度因数重复性。试验表明，该方法将未补偿情况下光纤陀螺全温范围内的标度因数重复性(1σ)由271×10-6~280×10-6减小到了32.5×10-6~43.5×10-6，标度因数重复性误差减小了84%~88%，并验证了该方法的有效性。     

非预混条件下的旋转爆轰燃烧室双波头演化过程数值模拟

针对旋转爆轰燃烧室双波头演化过程中流场结构变化的问题,对非预混条件下的旋转爆轰燃烧室从起爆到形成稳定的双波头过程进行了数值模拟研究。研究结果表明,从起爆到形成稳定爆轰过程,燃烧室主要经历了起爆、爆轰波对撞和稳定爆轰三个阶段；在爆轰波对撞阶段,首次对撞是两个爆轰波间的对撞,由于对撞点处缺少新鲜混合气,从而在对撞结束后衰减为两个压力波。第二次对撞是两个压力波间的对撞,因为在第二次对撞点附近存在新鲜混合气来支撑爆轰波的持续传播,故对撞结束后产生了一个爆轰波和一个较弱的压力波；第二次对撞发生后,燃烧室内的压力波反射叠加并形成局部高压区,此高压区压缩气体使气体温度升高,高温气体引燃混合气后,最终发展成为第二个爆轰波；稳定阶段,两个爆轰波均能稳定自持传播,爆轰波峰面压力可达1.45MPa,波后温度为2500K,爆轰波速度稳定在1738m/s,产生的推力与比冲分别为79.76N和2312.15s；斜激波的存在使燃烧室出口平面流场产生了较大波动。      

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

热防护材料高温异型传感器校准技术研究

高温异型传感器广泛应用在热防护材料研究领域，因其测温部分比通用温度传感器尺寸短，现有的校准装置无法满足该类传感器的校准需求。针对高温异型传感器无法校准的问题，提出了一种应用专用高温恒温炉、基于比较法的校准方法，研制了高温异型传感器校准装置，实现了该类温度传感器的量值溯源，并进行了不确定度分析。     

预旋喷嘴径向角度对预旋特性影响的数值研究

为了降低低位进气预旋流路的气动损失，针对带有不同径向角度（0°~30°）预旋喷嘴的预旋系统进行了数值仿真，并对流动特性、温降特性和比熵增特性进行了分析。结果表明:随着预旋喷嘴径向角度的增大，预旋系统无量纲温降先增大后减小，流动阻力减小，预旋系统的流量随之增大。旋转雷诺数为2.3×107时，预旋喷嘴带径向角度的预旋系统无量纲温降比传统喷嘴最大可提高18.3%，存在某一角度使预旋温降特性达到最好。预旋系统内的耗散主要发生在预旋腔和共转盘腔内，径向角度为10°时其比熵增变化量分别占整个预旋系统总体比熵增的42.4%和30.2%；合理设计预旋喷嘴的径向角度，能改善预旋腔内气流的流动效果，并且可以减少整个预旋系统的不可逆损失。      

基于隐式温度修正的二维热线风速仪校准方法

热线风速仪主要用于湍流流场测量。热线测量的主要误差来源是由环境温度变化导致的热线校准参数的变化。Brunn提出的传统温度效应修正方法在环境温度变化较大的情况下会带来明显的误差。本文经过理论推导,提出了一种新的基于隐式温度修正的二维热线风速仪校准方法,并开展了热线校准实验研究。结果表明:当环境温度变化在4℃范围内时,本文提出的方法与Brunn方法的测量精度相当;当环境温度变化超过4℃时,本文提出的方法的测量精度远高于Brunn方法。     

Modeling the effects of green alternative on heat island mitigation of a meso level town,West Bengal,India

Urban heat island (UHI) is emerged as a ubiquitous phenomenon that affects the outdoor thermal comfort. Hence urban microclimatic studies using numeric simulation software to find out adaption strategies are attracting the great attention of researchers and policymaker. Number of scientists carried out their research on this topic using different tools and technique whereas ENVI-met model is the most widely used simulation tools. The present study intended to examine the implication of green infrastructure of the town on enhanced microclimatic condition and to evaluate the best suitable mitigation strategy modelling cool city with ENVI-met software (V4). Five greening condition such as existing UHI condition (C1), 100% greening of roof (C2), 100% greening of roof and walls (C3), 50% greening of roof and walls (C4) and: Plantation at suitable area with 50% greening of roof and walls (C5) have been taken into consideration for the microclimate simulation for all three selected sites. Among these five conditions, C3 for the open mid-rise and compact low-rise, C5 for the open low-rise are identified as one of the most suitable strategies which can reduce the air temperature of peak hours by 2.6 °C, 1.33 °C and 1.87 °C respectively. These models are validated by simple linear regression between simulated and existing air temperature in case of existing UHI condition (C1) and in all the cases coefficient of determination value is high such as for open mid-rise, compact low-rise and open low-rise, it is 0.92, 0.92 and 0.75 respectively. Therefore it can be concluded that the application of those strategies can improve the urban thermal environment as well as the outdoor thermal comfort of English bazaar Town and its surroundings.